Mistral 360 Reflow Oven
Mistral 360 Reflow Oven
The Mistral 360 is a very populair model. It fit perfectly in medium production lines. The Mistral series convection reflow soldering systems uses re-circulated hot air to accomplish reflow at much lower temperatures than IR systems. Using constant, even heating, a great variety of board sizes will reach reflow temperature with the same heat profile. By eliminating set-up time your production line can work to its fullest capacity. “Environment friendly” is more then just a catch to the Mistral designers. With reduced energy consumption and carefully controlled air-flow and exhaust systems, your plant will only benefit from its introduction.
Highlights:
- Suitable for single sided as well as double sided pcb’s.
- Easy processing through the 5.7″ LCD touchsreen with an intuative user interface
- Forced air convection provides uniform heating and prevents shadowing.
- 4 zones with maxium temperatures up to 300°C. Can be used for lead free soldering
- Optional cabinet available
- Visual inspection of reflow process through top glass
- Two detachable thermocouples for measuring substrate temperatures.
- Control by RS232 connection is available
- Exhaust pipe system included for oven, in- and output
Technical details:
Dimensions: 2280 x 755 x 350mm (Without optional cabinet).
Power requirements: three phase, 380/400VAC, 16A each phase, 50-60Hz.
Max. power consumption: 10KW (10.000 W).
Max. PCB size: width 360mm, height 25mm.
Conveyor: mesh belt, belt speed from 3 to 110 cm/min.
Length process chamber: 1350mm
Zones: 5, preheat Z1 350mm, Z2 350mm, Z3 350mm, reflow Z4 300mm and cooldown 320mm.
Control: 5.7 Inch full color LCD touchscreen with password system option.
I/O: USB, RS232 for USB or Legacy, two thermocouples for measuring profile.
Heat up time: +/- 15 min.
Weight: +/- 160Kg.
