Dima Solano RO-510 Reflow oven

Voor meer informatie omtrent voorraad en prijzen, klik hier.

Dima solano RO-510 Reflow oven in zeer goede conditie.
Bouwjaar 2006

Features:

• 4 independent controlled heating zones.

• Internal cooling zone.

• Integrated ionizer for ESD safe soldering.

• DIMAsoft reflow profiler software available.

• Flux traps to minimize contamination of system

• Easy to service one way approach heating units.

• SMEMA interface.

• Microprocessor controlled.

• Lead free approved.

• Built-in reflow tracker in standard software

• standard 100 programs and 5 profiles can be stored.

• Optional oven manager software. 

Specificaties:

Dimension (L x W x H) : 2750 x 105 x 1420 mm
Conveyor: 500mm wide stainless steel mesh belt and pin conveyor with 5mm pins (3 mm optional)
Product dimension:Mesh: 430MM width, Max 50mm height (incl. components)
Pin conveyor: 25-450mm width, max 25mm height (incl. Components)
Transport speed: 0.05 – 0.8 m/min
Controller: Microprocessor controller for heating and cooling zones, with USB port (for optional Oven Manager Sofware) Speed and temperature profiling controlled via TFT touchscreen or by optional PC
Heating system: Full convection circulated hot air from top and bottom, 4 heatings on top and 1 at the bottom, 1 cooldown zone with 3 cooling ventilators at the end of the process chamber.
Exhaust:The oven uses external exhaust with a required airflow of 1150 m³/h.
Cooling: Radial ventilator at the bottom. 
Heating power: Standard : 17.5 kW (approx. 6 kW after warm-up)
                           with RO-5030 : 19.3 kW (approx. 6 kW after warm-up)
Software License available under art.nr: SWRO-0340 
User Interface: Standard interface via TFT-display with touchscreen on the oven
                           optional: PC with Oven Manager software
Tunnel length: 1700 mm heated tunnel, 2200 mm proces chamber 
Power: 3 phase 380 / 420 Volt
Weight: 610-660 Kg (without/with bottom heating)

Voor meer informatie, neem contact met ons op.