SMT Quattro peak S

Voor meer informatie omtrent voorraad en prijzen, klik hier.

SMT Quattro peak S Reflow oven in zeer goede conditie


Specificaties:

Overall dimensions
Length: 4671.5 mm
Width: 1435 mm
Height (in delivery condition / incl. warning light): 2.) 1647 mm / 2233 mm
Inlet height, adjustable by customer: 2.) 830 ... 1030 ±20 mm

Weight approx. 2300 kg
Number / diameter foot: 10 / 80 mm
Max. floor loading: 750 kg/m²

Process area
Length: 4350 mm
Pre-heating zones: 3
Peak zone (top/bottom): 2 peak zones with 4 heating modules (2 top / 2 bottom)
Bottom heating modules pre-heating zones: 3
Heated tunnel length, total: 2598 mm
Active convection length: 2060.5 mm
Length of cooling zone: 1752 mm
Temperature measurement: NiCr-Ni sensors in the hot gas flow
Warm-up time: approx. 30 min.
Warm-up time with economy switch: approx. 60 min
Heat transfer: 100% forced convection
Process temperature (pre-heating zone/peak zone): max. 300 °C (pre-heating zone) / 350 °C (Peak)

Transport chain conveyor
Working width usable with PCB support: 60 ... 510 mm
Usable working width with PCB support: PIN level ...-10 mm
Working direction: left-right
Fixed rail: front
Pass through height (top/bottom): 30/30 mm
Max. loading 3 kg/m

Conveyor speed 0.2 ... 3.0 m/min.
Average conveyor speed 0.7 ... 1.2 m/min.

Exhaustion 3.)
Suction pipe: 1 x Ø 200 mm
Required exhaust air at pipe (inlet): approx. 600 … 800 m3/h
Temperature of exhaust air at the pipe: < 50 °C
Internal exhaust air resistance of oven:3 - 8 mbar

Continuous sound pressure level < 70 dB(A)
Control unit CDIAS with RT 7

Nitrogen supply * 4.)
Connecting armature: R 3/8“ internal thread
Working pressure (at connecting armature): 6 ... 8 bar
N2-consumption, steady state condition and transport width 220 mm: approx. 9 m3/h
N2-consumption, full load and transport width 220 mm: approx. 15 m3/h
Readiness for the system (1000 ppm, N2 < 5 ppm O2) approx. 15 min.

Power supply
Connecting power supply: 3~N, PE 230 / 400 V, 50 Hz
Max. current consumption per phase: 95 A
Max. current consumption per phase with economy switch: 70 A
Power consumption during heat-up: 64 kW
Power consumption steady state condition: approx. 9 kW h

1.) Machine with chain conveyor 220 mm transport width, fan regulation and no other options
2.) Infeed height 950 mm; corresponding to a changed inlet height the other heights of the reflow system are changing
3.) Connection of a flexible, heat resisting (at least 100 °C) hose (available by SMT) or tube. The waste air exhausting unit width adjustable throttle valve mounted after the suction sleeves has to be installed by the user
4.) Nitrogen supply with filters for solid and liquid parts has to be mounted by the user, recommended supply of nitrogen with oxygen content < 5 ppm * with option nitrogen only

Voor meer informatie, neem contact met ons op.