Pick & Place
- Siemens Siplace HF 3
Siplace HF 3 in zeer goede conditie.
Specificaties volgen nog.
Machine met Duits onderhoud.
Voor meer informatie, neem contact met ons op. - Siemens Siplace MTC 2
Siplace MTC 2 in zeer goede conditie.
Specificaties volgen nog.
Machine met Duits onderhoud.
Voor meer informatie, neem contact met ons op. - YAMAHA IPulse M1
Yamaha I-Pulse M1 in zeer goede conditie.
Specificaties:
Board Size(LxWxT)mm Max.460 x 410 x 2.0㎜,Min.50 x 50 x 0.5㎜Conveyor flow/speed → 420㎜/sec(with soft-stop)Tact Time 0.16sec/chip,0.38sec/TSOP(32pin)Up ward Vision… - YAMAHA IPulse M4
YAMAHA I-Pulse M4 in zeer goede conditie.
Specificaties: Volgen later.
Voor meer informatie, neem contact met ons op. - TVM 920 Pick and Place
TVM 920 Pick and Place in zeer goede conditie.
Specificaties:Max applicable PCB 327*570mm
Max XY Moving area 520*480mm
Max Z Moving area 15mm
Placement head quantity 4
Positioning accuracy 0.025mm
Max mounting capability 7000… - DIMA Modulo MP-200 Pick en Place
DIMA Modulo MP-200 Pick en Place in goede conditie.
Features:
∙ Modular built for growth
∙ 120 8/12mm feeder positions in-line or 180 feeders off-line
∙ Standard with full vision alignment (no laser alignment)
∙ No… - DIMA HP110 Pick en Place
DIMA HP110 Pick en Place in goede conditie.
Specificaties:
HP-110 St. Opt. Remarks
Tact Time 1.16 sec/QFP with Area CCDCamera S Simultaneous with 2 pipettes
0.85 sec/chip with Close Loop Electromechanical Alignment O Simultaneous… - Mydata TP9-2U Pick & place
Mydata TP9-2U Pick and place Machine in zeer goede conditie.
Bouwjaar: 2001
Eigenschappen
- Split axis for strength & dependibility
- TPSys, real time control system
- Max Board Size 341mm x 470mm
- Min Board Size 19mm x… - Essemtec FLX2010-V Pick & Place
Essemtec FLX2010-V Pick & Place in zeer goede conditie.
Bouwjaar 2007.
Eigenschappen:
• Changeover without downtime
• Large feeder capacity
• Graphical control software
• Inventory control and traceability
• Integrated… - Assembleon MG1 Pick & Place
Assembleon MG1 Pick & place in zeer goede conditie.
bouwjaar 2006
Specificaties:
Optimal output per hour: 24,000
IPC-9850 output per hour: 17,400
Placing accuracy at 3 Sigma: 30 micron
Alignment principle: Line array
Footprint (L… - Assembleon Opal-XII
Assembleon Opal-XII in zeer goede conditie.
Bouwjaar: 2006
Features:
• On the fly alignment using a vision system with a Line Array Camera standard equipped with a side illumination unit for BGA’s, µBGA, CSP components.
•… - Juki KE-1080L
Juki KE-1080L in Excellent condition.
Vintage: 2014
Specifications:
Board sizes supported: 410x360MM
Component heights supported: 12MM, 20MM,
component size Laser recognition: 01005 (0402 metric)~33.5mm
component size Vision… - Juki KE-2080E
Juki KE-2080E in zeer goede conditie
Bouwjaar 2014
Specificaties:
Board sizes supported: 510x460MM
Component heights supported: 12MM, 20MM,
component size Laser recognition: 01005 (0402 metric)~33.5mm
component size Vision… - Dima fineplacer FP-600 Manual Pick and Place
Dima Fineplacer FP-600 in zeer goede conditie, exclusief tafel.
Features:∙ All in one box system or flexible modular system
∙ Extreme light movement because of the Easyglide guiding system
∙ No problems when picking round… - Sony SI-G200 mk7 Pick and place
Sony SI-G200 Mk7 in zeer goede conditie
Bouwjaar: 2010Inbegrepen feeders:
80x 8MM
6x 12/16MM Inbegrepen nozzles:
Nozzle 0201 4x
Nozzle 0402 24x
Nozzle 0603 24x
Nozzle 0805 24x
Nozzle 1206 24x
Nozzle SO8/FN24… - Mycronic MY100DXe 10
Mycronic Mydata MY100DXe 10 in zeer goede conditie.
Bouwjaar: 2013
Features:∙ On-the-fly mount order optimization
∙ Vision autoteach with snap-to-grid
∙ Automatic illumination settings
∙ Intelligent feeder concept –… - Siemens Siplace S27 HM
Siemens Siplace S27 HM in zeer goede conditie.
bouwjaar: 2006Specificaties:
Type of placement head 12-Nozzle Collect & Place Head and/or6-Nozzle Collect & Place Head
Number ogantries 2
Benchmark placement rate 12/12 26,500… - Siemens Siplace F5 HM
Siemens Siplace F5 HM in zeer goede conditie.
Bouwjaar 2006Specificaties:
Technical Data
Range of components
Standard vision module 0603 to 55×55 mm
DCA vision module 0.5×0.25 mm to 55×55 mm
Benchmarked placement… - Essemtec Pantera XVC Pick and Place
Essemtec Panter XVC in zeer goede conditie.
Specificaties
Production
Max. placement speed/Cycle time 4500cph/0.8 sec
Speed according to IPC9850 3400 Components per hour
Feeder
Feeder capacity (8mm Tape) 57
Feeder type… - Essemtec Pantera X Pick and Place
Essemtec Pantera-X in zeer goede conditie
Specificaties:
Production
Max. placement speed/Cycle time 4500cph/0.85 sec
Speed according to IPC9850 2600 Components per hour
Feeder
Feeder capacity (8mm Tape) 114
Feeder type…
Taalkeuze

Contactgegevens
Fix Trade B.V.
de Schutterij 15
3907 PJ
Veenendaal
0031 (0) 318 544 777
info@fixtrade.nl