Dinghua DH-G200 BGA rework station

Artikel 6 van 93

Voor meer informatie omtrent voorraad en prijzen klik hier

Dinghua DH-G200 BGA Rework station
Bouwjaar 2016

Friendly Design:
Embedded industrial PC With intelligent temperature module, Stable and reliable.
Windows Operating system in English
5 different sizes of nozzles – Upper: 31x31MM, 41x41mm Bottom: 34x34mm 55x55mm
3 heating zones, two of which are Hot air and the 3rd is an Infrared pre-heat zone
High power cross flow fan providing ample cooling and helps preventing warpage.

Accurate temperature control:
Three independent temperature controllable heating zones + PID self setting adjusted, Temperature accuracy will be ±2°C
8 heating segments and massive storage of groups
Convenient BGA heating curve settings and searchable index
Automatic temperature curve analysis.

Convenient visual alignment:
Optical alignment + CCD color lens system
2 color separation, magnification, micro adjustment
Auto focus, auto correction, auto color differentiation.
Light level adjustment system.
Japan camera can move front and back.
Built-in vacuum pump, for picking up BGA components.

Precision components:
Precise fine-tuning of BGA chip
X, Y , Z micrometers fine-tuning, Placement accuracy will be ±0.01 MM.
V-groove clamp + universal fixture suitable for all kinds of PCB.
Hot air nozzle with magnet, rotate in any angle, easy replace and operate.
Heating system and mount head 2 in 1 design, precise positioning.

Safe and secure:
With fan failure protection, thermocouple failure protection function.
Overheating protection, emergency stop function.
Start up password and modify protection.


VoltageAC 230V (110v optional)
total power5300W
top heater1200W
lower heater1200W
bottom heater2700W
positioningV-groove, PCB support
temperature controlK Sensor, Closed loop
temperature accuracy±2 degree
workplace finetuning±15mm forward/backward ±15mm right/left
placement accuracy±0.01mm
camera magnification10x-220x
pcb sizeMin 20x20mm Max 390x400mm
bga chip sizesize 2x2 ~ 80x80mm
minimum chip spacing0.15mm
approx weightApprox 60KG

Voor meer informatie, neem contact met ons op.

Specificatie Omschrijving
Disclaimer Foto's van machines zijn ter demonstratie, het werkelijke uiterlijk van uw machine kan verschillen.
U kunt ons altijd vragen foto's te maken van de machine waar u informatie over wilt hebben en u bent altijd welkom om bij ons langs te komen op locatie om de machine te bezichtigen en te testen.


Meld u aan voor onze nieuwsbrief


Fix Trade B.V.
de Schutterij 15
3907 PJ

0031 (0) 318 544 777

© 2021 - 2024 FIX TRADE | sitemap | rss | webwinkel beginnen - powered by Mijnwebwinkel