DIMA HP 100-Pick and Place
DIMA HP 100
Pick and Place
Versatile, Accurate, Fast, Efficient
| Tact Time | 1.16 sec/QFP with Area CCD Camera 0.85 sec/chip with Close Loop Electromechanical Alignment |
| Optimal Placement rate | 3125 on IPC 9850 using Area SCC & LCC Camera’s 4200 on IPC 9850 using CLEA |
| Nominal Placement rate | 2500 – 3500 cph |
| Applicable components | 0201 - Chip, Melf, SOT, SOIC, TSOP, TNT, PLCC, QFP, BGA, µBGA, LCC Field of view 42 x 42mm mm (1,65”) Fine pitch down to 0,4mm (16 mil) |
| Tool exchange station | 12 nozzle positions |
| Number of heads | Single gantry with two independently controlled pipettes. |
| Mounting accuracy (X,Y) 3σ | 50µ with Area CCD Camera 100µ on Close Loop Electromechanical Alignment |
| Maximum number of intelligent feeders |
|
| PCB Dimensions (X,Y) | Min: 30 x 30mm Max: 330 x 450mm |
| PCB Positioning | Fiducial recognition through ESI Correctplace® Teach-in of holes or Odd shape lands is possible
|
| PCB Loading & alignment time | Approximately 2,8 seconds |
| Number of axis | 2 |
| Pick up error detection | Through vacuum check or vision verification |
| Nozzle types | 8 different shapes |
| Electric power | Voltage: 220- 240Vac Frequency: 50 – 60Hz Consumption: 2500 Watt |
| Air supply | Pressure: 6.5-7 Bar or 94-102 PSI Quality: air that has been cool dried and filtered with a 3 µm filter Connection: PU-6 air hose (outer diameter 8.3mm, internal diameter 5.9mm |
| Operating temperature | 15 till 40 degrees Celsius |
| Humidity | 20 till 90% no dew |
| Noise | ≤ 70 dB(a) |
| Machine dimensions and weight | Length: 1700 Width: 1500 Height: 2200 Weight: 450 Kg without feeders 800 Kg with full feeder configuration
|
